2 Wheel Drive Truck Driveshafts

DRIVESHAFT DESCRIPTION:
- COMPLETELY ASSEMBLED and BALANCED Custom Built Driveshaft to fit your truck
- DANA SPICER Solid Body NON Greaseable Universal Joints for high mileage on or off road
- Built with DANA SPICER and NEAPCO driveline components. Only the best parts on our shafts!
- DANA SPICER, NEAPCO, SONNAX or MARK WILLIAMS slip yokes
DIAMETER:
- Your choice of 2 inch, 2.5 inch, 3 inch, 3.5 inch or 4 inch tube outside diameter
SERIES:
- Available in 1310, 1330, 1350, 1410, GM 3R, Dodge 7260, Dodge 7290 series or any combination of these to build exactly what you need.
MATERIAL:
- High Strength DOM steel tubing - If you ever twist our steel tubing or break our welds...Replacement is FREE!!!
WELDING:
- All DENNY'S DRIVESHAFTS are welded on the latest state of the art computer controlled MIG welders by our trained and experienced staff for superior welds every time.
BALANCE:
- ALL DENNY'S DRIVESHAFTS are HIGH SPEED - HIGH RPM BALANCED and TESTED to be sure each driveshaft will run smoothly at your full rpm range and at all road speeds. Our equipment can balance and test your driveshaft to 10,000 rpm. This is priceless when it comes to customer satisfaction.

- Denny's Free Lifetime Labor means if you ever need it shortened, re-balanced, change u-joints, rebuild the CV, replace the spline....the Labor is FREE
  - Please see our Free Lifetime Labor page for details. CLICK HERE

Please click on the choices below

If you don't find what you need...take some dimensions and email us for a quote!

Diagram "B" automatic or manual transmissions with car style driveshaft and normal pinion yoke on rear end
Diagram "K" same as "B" but with flat flange at rear end
Diagram "G" for spline and slip driveshafts
Diagram "H" same as "G" but with flat flanges at both ends

2WD DRIVESHAFTS

2WD Driveshafts with Transmission Slip yoke

	Denny's STR-3 Street Rod Driveshaft 3 inch DOM STEEL complete with Dana Spicer U-joints and 1310 slip yoke CLICK HERE for More Details Part Number: STR-3	$525.95	CUSTOM BUILT

	Denny's STR-35 Street Rod Driveshaft 3.5 inch DOM STEEL complete with Dana Spicer U-joints and 1310 slip yoke CLICK HERE for More Details Part Number: STR-35	$590.95	CUSTOM BUILT

	Denny's STR-330 Street Rod Driveshaft 3 inch DOM STEEL complete with Dana Spicer U-joints and 1330 slip yoke CLICK HERE for More Details Part Number: STR-330	$545.95	CUSTOM BUILT

	Denny's STR-3530 Street Rod Driveshaft 3.5 inch DOM STEEL complete with Dana Spicer U-joints and 1330 slip yoke CLICK HERE for More Details Part Number: STR-3530	$630.95	CUSTOM BUILT

	UPGRADE to Sonnax Forged Slip Yoke for Denny's 2wd Truck Driveshafts CLICK HERE for More Details Part Number: UPGRD-SONNAX	$120.00	IN STOCK

Spline and Slip Driveshafts

With 1310 Series Slip Yoke

	1310SS-2 Spline and Slip Driveshaft 2 inch DOM tube 1310 slip yoke with any size weld yoke CLICK HERE for More Details Part Number: 1310SS-2	$295.95

	1310SS-2.5 Spline and Slip Driveshaft 2.5 inch DOM tube 1310 slip yoke with any size weld yoke CLICK HERE for More Details Part Number: 1310SS-2.5	$310.95

	1310SS-3 Spline and Slip Driveshaft 3 inch DOM tube 1310 slip yoke with any size weld yoke CLICK HERE for More Details Part Number: 1310SS-3	$355.95	CUSTOM BUILT

	1310SS-3.5 Spline and Slip Driveshaft 3.5 inch DOM tube 1310 slip yoke with any size weld yoke CLICK HERE for More Details Part Number: 1310SS-3.5	$450.95

With 1330 Series Slip Yoke

	1330 Series 2.5 inch with Spline and Slip Driveshaft for CHEVY, GMC, FORD, DODGE, JEEP, IHC CLICK HERE for More Details Part Number: 1330SS-2.5	$325.95

	1330 Series 3 inch with Spline and Slip Driveshaft for CHEVY, GMC, FORD, DODGE, JEEP, IHC CLICK HERE for More Details Part Number: 1330SS-3	$375.95

	1330 Series 3.5 inch with Spline and Slip Driveshaft for CHEVY, GMC, FORD, DODGE, JEEP, IHC CLICK HERE for More Details Part Number: 1330SS-3.5	$455.95

With 1350 Series Slip Yoke

	Denny's 1350 Series 3 inch Spline and Slip Driveshaft for CHEVY, GMC, FORD, DODGE, JEEP, IHC CLICK HERE for More Details Part Number: 1350SS-3	$425.95

	Denny's 1350 Series 3.5 inch Spline and Slip Driveshaft for CHEVY, GMC, FORD, DODGE, JEEP, IHC CLICK HERE for More Details Part Number: 1350SS-3.5	$510.95

	Denny's 1350 Series 4 inch Spline and Slip Driveshaft CLICK HERE for More Details Part Number: 1350SS-4	$565.95

With 1410 Series Slip Yoke

	Denny's 1410 Series 3 inch Spline and Slip Driveshaft CLICK HERE for More Details Part Number: 1410SS-3	$495.95	CUSTOM BUILT

	Denny's 1410 Series 3.5 inch Spline and Slip Driveshaft CLICK HERE for More Details Part Number: 1410SS-3.5	$555.95

	Denny's 1410 Series 4 inch Spline and Slip Driveshaft CLICK HERE for More Details Part Number: 1410SS-4	$585.95

DENNY'S can build you a REAR driveshaft that will handle the abuse.

Splines, slip yokes and heavy duty u-joints in 1310, 1330, 1350, 1410, 7260, 7290 and GM 3R SERIES are no problem for most any application.

Check out the SUPERIOR strength of 1350 series and you'll know it is worth owning for the most demanding applications and also for anybody who just wants the best.

If upgrading to a stronger or more reliable unit in any series is what you need....give us a call.

Now you can have the same quality and strength that drag racers all over the world rely on.

Who else but DENNY'S is crazy enough to tell you "IF YOU CAN POSSIBLY TWIST OUR TUBING OR BREAK OUR WELDS...WE'LL REPLACE IT FREE" ? Why wait until it breaks...it could cost you more when it does.