Chevy and GM 8.6 inch 10 Bolt Rear End Pinion Yokes ...30 Spline
1999 and newer
The 8.6 inch 10 bolt and the 8.5 inch 10 bolt 
share the same 30 spline pinion count and diameter.
- Found in Chevy and GM cars from 1999 with rear disc brakes
- Found in Chevy and GMC light trucks from 2000 with rear disc brakes
- Denny's Driveshafts stocks the Chevy and GM Corporate 8.6 inch 10 Bolt rear end pinion yokes in a variety of u-joint series in the 30 spline version.
- The 8.6 inch 10 bolt pinion yokes will be the newer triple lip seal design.
- These have a seal inside the dust shield that is attached to the sleeve that is pressed onto the yoke hub and works in conjuction with the seal that fits into the housing.
- The older 8.5 inch 10 bolt pinion yokes will be the normal hub surface on the yoke and use the normal seal as seen for many years.
- Note: 8.5 pinion yokes can be used on the 8.6 but you will need to use the 8.5 seal.
Chevy & GM 8.6 inch 10 Bolt 30 splines
3R Series - Inside C-Clip style
1350 Series - 3.625 between tabs
Replacement Seal - Sleeve
|
