1330CV-2.5 Ford BRONCO 1979 CV Driveshaft with 2.5 inch tube diameter custom built to fit FRONT or REAR with up to 4 inch lift

Part Number:
1330CV-2.5

UPC:

Your Cost $425.95

STATUS: PLEASE CALL TO ORDER

Part Number: 1330CV-2.5

Double Cardan 1330 series 2.5 inch CV Driveshaft - Use on FRONT or REAR

Custom built to fit your 1979 FORD BRONCO
Designed to easily handle up to a 4 inch lift.
HIGH SPEED/HIGH RPM Balanced for smooth operation on or off the highway
As with all Denny's 4X4 Driveshafts... "IF YOU CAN POSSIBLY TWIST OUR 4x4 TUBING OR BREAK OUR WELDS...WE'LL REPLACE IT FREE"

1330CV-2.5 Ford BRONCO 1979 CV Driveshaft with 2.5 inch tube diameter custom built to fit FRONT or REAR with up to 4 inch lift

STATUS: PLEASE CALL TO ORDER

YOUR COST: $425.95

Part Number: 1330CV-2.5

Double Cardan 1330 series 2.5 inch CV Driveshaft - Use on FRONT or REAR

FEATURES

2.5 inch .083 wall thickness DOM High Strength Steel Tube
- As with all Denny's 4X4 Driveshafts... "IF YOU CAN POSSIBLY TWIST OUR 4x4 TUBING OR BREAK OUR WELDS...WE'LL REPLACE IT FREE"
Proudly Built with DANA SPICER parts
- 1330 Series Double Cardan CV with SPICER 211179X greaseable centering yoke
- 1330 Series Greaseable SPICER Spline and SPICER Slip Yoke - total of 4 inches of slip travel
  - 1.375 x 16 SPICER GlideCoated (blue coating) spline with smooth shank allows seal on slip yoke to keep the water and mud out.
- 1330 Series SPICER 5-213X / 5-1204X Greaseable Universal Joints
- HIGH SPEED/HIGH RPM Balanced for smooth operation on or off the highway
- Comes with (4) 5/16 inch Grade 8 CV Mounting Bolts
- Denny's Free Lifetime Labor means if you ever need it shortened, re-balanced, rebuild the CV, replace the spline, change u-joints....the Labor is FREE
  - Please see our Free Lifetime Labor page for details. CLICK HERE
MEASUREMENTS ARE REQUIRED
- Please use our DIAGRAM "G" to measure correctly. CLICK HERE to view and PRINT Diagram "G"

OVERSIZE PACKAGE: Sorry ... this item DOES NOT qualify for Free Shipping!

1330CV-2.5 Ford BRONCO 1979 CV Driveshaft with 2.5 inch tube diameter custom built to fit FRONT or REAR with up to 4 inch lift

Please enter your email address in order to be notified when this item is available.

Ford Driveshafts and Driveline Parts > DRIVESHAFTS - TRUCKS > BRONCO 1979