Dana Spicer 72706-3-1X INNER AXLE Drivers Side 15 Splines fits 1985 to 1987 DODGE W150, W200, W250 with DANA 44 Disconnect Front Axle - OBSOLETE
|
|
Your Cost
Sorry, sold out
STATUS:
Discontinued Item...See other choices listed
|
|
DANA SPICER 72706-3X
- INNER AXLE SHAFT - DRIVERS SIDE
- Fits 1985, 1986, 1987 DODGE W150, W200, W250 with DANA 44 Disconnect front axle
- CHECK to be sure Dimension C = 19.19 inches on original axle shaft
72706-3X is OBSOLETE and NO LONGER Available
IMPORTANT NOTES:
- 73579-1X DOES NOT FIT 1985 TO 1987 with the bearing and seal at the end of the left side housing tube.
- 73579-1X DOES NOT have the machined bearing surface required on the 1985 to 1987
UPC:
Part Number: 72706-3X
|
Dana Spicer 72706-3-1X INNER AXLE Drivers Side 15 Splines fits 1985 to 1987 DODGE W150, W200, W250 with DANA 44 Disconnect Front Axle
|
FOR FASTER SERVICE, PLEASE ORDER ALL PARTS ONLINE
STATUS: Discontinued Item...See other choices listed
YOUR COST:
|
DANA SPICER 72706-3X
- INNER AXLE SHAFT - DRIVERS SIDE
- Fits 1985, 1986, 1987 DODGE W150, W200, W250 with DANA 44 Disconnect front axle
- CHECK to be sure Dimension C = 19.19 inches on original axle shaft
72706-3X is OBSOLETE and NO LONGER Available
IMPORTANT NOTES:
- 73579-1X DOES NOT FIT 1985 TO 1987 with the bearing and seal at the end of the left side housing tube.
- 73579-1X DOES NOT have the machined bearing surface required on the 1985 to 1987
DIMENSIONS
- 15 SPLINES
- C1 = 1.59 inch diameter with 15 splines
- C = 19.19 inches Centerline of u-joint to end of yoke
- Requires 5-760X Axle Universal Joint
- U-Joint Snap Ring Dimension = 2.188 inches ( 2 3/16 inches )
- U-Joint Bearing Cap Diameter = 1.188 inches ( 1 3/16 inches )
|
|
Dana Spicer 72706-3-1X INNER AXLE Drivers Side 15 Splines fits 1985 to 1987 DODGE W150, W200, W250 with DANA 44 Disconnect Front Axle
|
|
You May Also Need These Parts to Complete the Job
$175.95
|
$28.56
|
|
|