S1875-2 Rear output seal use with CV Yoke 3.066 OD with 1.875 ID for 1971-1979 NP 205
|
|
Your Cost
$13.95
STATUS:
IN STOCK
|
|
S1875-2
Rear output seal
1971-1979 NP205 Transfer case
Use to install 1310 or 1330 CV Yoke.
UPC:
Part Number: S1875-2
|
S1875-2 Rear output seal use with CV Yoke 3.066 OD with 1.875 ID for 1971-1979 NP 205
|
FOR FASTER SERVICE, PLEASE ORDER ALL PARTS ONLINE
STATUS: IN STOCK
YOUR COST:
$13.95
"Top quality Factory Fresh, Factory Boxed Genuine TIMKEN Parts at Denny's Driveshafts"
|
S1875-2
Rear output seal
Use this Seal when installing a 1310 or a 1330 series CV Yoke onto the rear output of a 1971-1979 NP205 Transfer case.
- To be sure this is the correct seal please check the following info before purchasing.
- Be sure your rear output tailshaft housing on your NP205 transfer case was designed for a seal diameter of 3.062 (3 1/16 inches)
- If 3.062 is correct then this seal will work to install any 1310 or 1330 CV yoke with a seal hub diameter of 1.875 (1 7/8 inches)
|
S1875-2 Rear output seal use with CV Yoke 3.066 OD with 1.875 ID for 1971-1979 NP 205
|
|