FREE
GROUND
SHIPPING
on Parts Orders Over $99.00
Measuring Diagrams
Shop By Vehicle Type
I looked all over for a part for dodge and ordered it from here but had actually ordered the wrong part. They went out of their way to call me and double check that is what I needed. Lucky for me they were able to find the correct part and got it ordered... ...read more
Steve R ~ Argenta , IL
Click here to send us your testimonial
Dana Spicer 3-3-508KX Slip Yoke 1410 series 16 spline 7.812 inches
$81.95 each
Part Number:
3-3-508KX
$81.95 each
DANA SPICER 3-3-508KX
1410 series Slip Yoke
Fits Spline and Slip Style Driveshaft
It will fit in place of the original slip yoke on any 16 spline driveshaft with a spline diameter of 1.5 inches
16 splines and 1.5 inch Spline Diameter
7.812 inches from center of u-joint bearing cap to end of yoke with seal removed.
SAME AS - ALTERNATE
Status: IN STOCK
Neapco N3-3-508KX Slip Yoke 1410 series 16 spline 7.812 inches
$87.95 each
Part Number:
N3-3-508KX
$87.95 each
NEAPCO N3-3-508KX
Fits Spline and Slip Style Driveshaft
It will fit in place of the original slip yoke on any 16 spline driveshaft with a spline diameter of 1.5 inches
16 splines and 1.5 inch Spline Diameter
7.812 inches from center of u-joint bearing cap to end of yoke with seal removed.
Status: IN STOCK
Dana Spicer 3-40-1621 Driveshaft Spline 1.5 inch x 16 fits 3.5 inch .083 wall steel tubing
$74.95 each
Part Number:
3-40-1621
$74.95 each
DANA SPICER 3-40-1621
For spline and slip style driveshafts
Fits any series 16 Spline SLIP YOKE designed for 1.5 inch diameter spline
Fits 3.5 inch OUTSIDE TUBE Diameter
3.345 inch butt diameter fits .083 WALL STEEL TUBING
Major SPLINE Diameter = 1.5 inches
SPLINES = 16
K = 7.344 in.
L = 2.500 in.
Blue Glidecoated Spline for long life
R = 6.406 in.
Steel
Status: IN STOCK
Dana Spicer 3-40-1491 Driveshaft Spline 1.5 inch x 16 fits 3.5 inch .083 wall steel tubing
$102.95 $96.95 each
Part Number:
3-40-1491
$102.95 $96.95 each
DANA SPICER 3-40-1491
For spline and slip style driveshafts
Fits any series 16 Spline SLIP YOKE designed for 1.5 inch diameter spline
Fits 3.5 inch OUTSIDE TUBE Diameter
3.345 inch butt diameter fits .083 WALL STEEL TUBING
Major SPLINE Diameter = 1.5 inches
SPLINES = 16
K = 7.531 in.
L = 3.00 in.
Blue Glidecoated Spline for long life
R = 6.594 in.
Steel
Status: IN STOCK
4 Matching Results Found
Results per Page: 2 5